BITUPACH

sphaltic mortar, clever for their use, formulated with the help of betumen and arid of selected grain. \r\n \r\n Employment way \r\n To) It Supports: It should be strong and to be clean, free of oils and fatty, dry and I exempt of cement grout. It should be dry (maximum humidity of 4% according to CM-GERAT). \r\n B) Application: To apply evenly with palette or flat. Compactar carefully using a shovel or a rammer. \r\n BITUPATCH will take its definitive form under the action of the traffic for what the opening to the traffic can be made immediately. BITUPATCH will be applied with a slight sobreespesor above the level of the pavement with object of assuring the level after the compactación. \r\n The consumption depends fundamentally on the application method, as well as the characteristics of the support. In general, the consumption will be approximately of 2 Kg. of BITUPATCH for surface m2 and mm of thickness. This consumption is theoretical and it depends in the compactación way and of the ruggedness of the support, for what you/they should be adjusted in particular for each work by means of tests . \r\n Applications \r\n REPAIR OF AREAS OF CIRCULATION (PARKINGS, HIGHWAYS, ETC) LAYERS OF FINISH ON GUTTERS. LAYERS OF FINISH SURROUNDING OF TAPAS OF SEWER. SMALL \r\n TO CONSULT WITH THE TECHNICAL DEPARTMENT ANY APPLICATION NON PRESVISTA IN THIS RELATIONSHIP. \r\n Cleaning of tools \r\n In fresh state, with PREPARATION UNIVERSAL BETTOR, once hardened it can only be eliminated mechanically. \r\n Presentation \r\n BITUPATCH is given in containers of 25 Kg. Properties \r\n Compatible with asphalt and concrete. Excellent adherence. \r\n Hardening for simple exhibition to the air and under the action of the traffic. Applicable on it supports dry or humid \r\n Storage \r\n Approximately 6 months in their original closed containers and in fresh place and I dry off. To maintain stored to a mimic temperature of +20 ºC. \r\n Manipulation and transports \r\n For the manipulation of this product the preventive habitual measures will be observed in the handling of chemical products, for example not to eat, to smoke neither to drink during the work and to wash his hands before a pause and when concluding the work. The specific information of security can be consulted in the handling and transport of this product in the Leaf of Data of Security of the same one. The elimination of the product and their container should be carried out of agreement with the effective legislation and it is the final possessor\'s of the product responsibility. \r\n Technical Data \r\n CHARACTERISTIC UNIT VALUE Kneaded density g/cm3 Aprox. 2 Grain mm 0-4 Applicable thicknesses mm Minimum 2 Maximum 4 The times of hardening are measured to 20ºC and 65% of H.R. Superior temperatures and/or H.R. inferior can shorten these times and vice versa. The technical reflected data are fruit of statistical results and they don\'t represent guaranteed minima. If control data are wanted those they can be requested of the product to our Technical Department. \r\n Cautions \r\n In the event of inferior superior temperatures at +25ºC to avoid to apply in superior thicknesses to 3 cm for layer. Not to add cement, sand or other substances that can affect to the properties of the product. \r\n N.R.I.302567 N.R.S.I. 37.00992 / MU